RO Me Pani Nahi Aa Raha Hai? 10 Karan Aur Ghar Par Solution (2026)

Garmi ho ya sardi, RO purifier achanak pani dena band kar de to ghar me sabse pehla sawaal yahi hota hai — "ab technician bulana padega?" Achhi baat ye hai ki zyadatar cases me problem chhoti hoti hai aur thodi samajh ho to aap khud pakad sakte ho. Is guide me hum ek-ek karke saare karan aur unka solution dekhenge — bilkul usi order me jaise ek experienced RO technician check karta hai.

Pehle samjho: RO me pani kaise aata hai?

Nal ka pani pehle pre-filters se guzarta hai, phir booster pump use pressure deta hai, RO membrane saaf pani ko alag karta hai aur ye pani tank me jama hota hai. Is chain me kahin bhi rukawat aayi, to tap par pani nahi aayega.

RO me pani nahi aane ke 10 main karan

1. Inlet valve band hai ya supply me pani nahi

Sunne me simple lagta hai, par sabse common karan yahi hai. RO ki inlet line par lagi chhoti ball valve check karo aur dekho ki main supply me pani aa raha hai ya nahi.

2. Bijli ya SMPS ki problem

Agar RO ki light hi nahi jal rahi, to socket, plug aur SMPS (adapter) check karo. SMPS 220V AC ko 24V DC me badalta hai — ye kharab ho to pump aur solenoid valve dono band ho jaate hain.

3. Sediment ya carbon filter jam

Mitti wale pani me pre-filter 2–3 mahine me hi choke ho sakta hai. Filter housing khol kar dekho — cartridge bhura ya kaala ho gaya hai to badalna padega.

4. Low Pressure Switch (LPS) supply nahi de raha

Jab inlet pressure kam hota hai, LPS pump ko chalne nahi deta. Supply ka pressure bahut kam hai to RO start hi nahi hoga.

5. Solenoid valve (SV) kharab

SV inlet pani ko on/off karta hai. Coil jal gayi ya andar kachra fas gaya to pani andar hi nahi jaata. Pump ki awaaz aaye par pani na bane, to SV bada suspect hai.

6. Booster pump kaam nahi kar raha

Pump se awaaz hi nahi aa rahi ya bahut dheemi hai, to pump ki wiring, pump head ya motor check karni padegi.

7. RO membrane choke

Membrane aam taur par 1.5–2 saal chalta hai, high TDS pani me isse bhi jaldi block ho jata hai. Pump chal raha hai, reject pani nikal raha hai par saaf pani bahut kam — to membrane check karo.

8. Float valve ya float switch atka hua

Tank bhara na ho phir bhi float ya high pressure switch ne supply cut kar di hai, to RO band pada rahega.

9. Pressure tank me hawa kam (under-sink RO)

Purane under-sink RO me pressure tank hota hai. Uska air pressure kam ho gaya to tank bhara hone ke bawajood tap par pani nahi aata.

10. Pipe mudi hui, jam ya air lock

Mudi hui pipe, choked connector ya pipe me hawa bhi flow rok deti hai.

Step-by-step: ghar par kaise check kare?

1. Plug nikalo aur inlet valve band karo — safety pehle.
2. Inlet valve kholo aur dekho supply me pani hai ya nahi.
3. Plug lagao — power light jal rahi hai? Nahi to socket aur SMPS check karo.
4. Pump ki awaaz suno. Awaaz nahi = bijli ke raaste (SMPS, LPS, float switch, wiring) me problem.
5. Pump chal raha hai par pani nahi = pani ke raaste (SV, pre-filter, membrane) me problem.
6. Pre-filter housing khol kar cartridge dekho, gandi ho to badlo.
7. Float valve check karo ki kahin atka to nahi.

Kaunsi problem ka kharcha kitna?

* *Rate brand, sheher aur part quality ke hisaab se alag ho sakte hain.

Ye skill aapke liye kamai ka zariya kaise ban sakti hai?

Har mohalle me dozens RO lage hain aur har RO ko saal me kam se kam 1–2 baar service chahiye. "RO me pani nahi aa raha" technicians ke paas aane wali sabse common call hai. Agar aap in 10 karano ko practically pakadna seekh lo, to har visit par service charge aur parts ka margin — dono kama sakte ho.

FAQ